Q8 - Distribution Amplifier Professional will find it essential for feeding multiple power amps; Q8 is a professional audio distribution amplifier with 2-input, 8-output,design for distribution of audio signals in large open space area. Q8 is capable of providing 8 discrete balanced outputs from 1 or 2 balanced mic-level or line-level inputs. The level of each output is individually adjusted via one of the eight screwdriver Output Level controls on the front panel. Each output may be assigned to either or both inputs via front panel accessible DIP switches. The outputs are through 8 isolation transformer. This floating ground configuration allows the inputs and outputs patched freely through patching panel and drive long lines without interference. Each output has three-segment LED output level meter, when red light is on which indicate overload.
DIP switches for input signals selection
Independent transformer for each output, allows input and output patched freely without signals interference
Provides -30dB to +6dB signal amplifying
XLR Balance 2-input and 8-output
Automatic AC power 90VAC - 245VAC
TYPE:
2 input, 8 output audio distribution amplifier.
INPUT SENSITIVITY:
+4dB and -10dB(internal jumper selectable).
OUTPUT GAIN:
Adjustable, -30dB attenuation to +6dB, 0 dB gain at center detent
FREQUENCY RESPONSE:
+0dB/ -0.2dB, 20Hz~20kHz
DISTORTION THD +N:
20Hz less than 0.05%
1kHz less than 0.002%
20kHz less than 0.002%
CMRR:
70dB at 1kHz, 65dB at 20
NOISE LEVEL:
-96dB.,Din-45405 Standard audio 10hZ~20kHz bandwidth at +4dBu operation setting
NORMAL OPERATING LEVEL:
+4dBu
INPUT IMPEDANCE:
22k ohm differential.
OUTPUT IMPEDANCE:
53ohm transformer balanced.
MAX. INPUT LEVEL:
+21dBu
MAX. OUTPUT LEVEL:
+21dBu. 600ohm load.
OUTPUT LOAD IMPEDANCE:
600 ohm min.
LINK OUTPUT:
+4dBu,. 10kohm load min,.1/4" phone jack ,TIP=Ch. A, RING=Ch. b.