M series is specially designed by ODY-PRO for fixed installation like bars, restaurants, recording studios, karaoke, and live performance which deliver legendary ODY-PRO' s reliability and audio performance at an economical price. M series come in three models to choose from - M320 with 300W, M520 with 500W and M720 with 750W RMS.
¡ï¡¡Indicators for power, signal, clip and protect.
¡ï¡¡Protection - against shorted outputs, mismatched loads, over heating,DC input/high frequency overload, full internal ¡¡¡¡fault ¡¡protection.
¡ï¡¡2 forced air cooling auto speed-controlled fans system
¡ï¡¡4-pins connector
¡ï¡¡2U compact chassis.
TECHNICAL
SPECIFICATIONS
M320
M520
M720
Power Handling per channel @1kHz,0.1%THD
Stereo into 4 ohms
450W
7800W
1100W
Stereo into 8 ohms
300W
500W
750W
Bridge-Mono into 4 ohms
1100W
1850W
2250W
Bridge-Mono into 8 ohms
1000W
1540W
2050W
Frequency Response
+0dB/-0.3dB from 20Hz to 20kHz
Phase Response
+/-0.1degrees from 10Hz to 20kHz at 1 Watt
Signal to Noise Ratio
A-weighted,better than 102 dB below full rated power better
than 105dB below full power from 20Hz to 20kHz
Total Harmonic
less than 0.05% at full power from 20Hz to 1kHz increasing linearly
Distortion THD
to 0.1% at 20KHz
Intermodulation
Distortion IMDS
less than 0.1% from 158 milliwatts to full power
Damping Factor
Greater than 500@100Hz /8 ohms, greater than 800@1000Hz /8 ohms
Crosstalk
0.1% at 20kHz
Protection
high frequency overload, full internal fault protection
Against shorted outputs, mismatched loads ,overheating, DCinPut /output
Input/output Data
Input connector
Abalanced three-pin female XLR connetor for each channel
Input Impedance
Nominally 20k ohms balanced, and 10k ohms unbalanced
A set of color-coded 5-way binding posts for each channel(for)
Output Connector
balanced plugs, spade plugs or bare wire )and Speakon for each channel
AC Mains Requirements
Draws 90 watts or less at idle. Draws up to 5 amps of current
